Troubleshooting guide

SECTION 3
OPERATING THE PRINTER
14
When the Printer is turned OFF, any changes made this way return to the original settings.
Inverse Printing
The Paper tab contains one element that is used to reverse or invert the printing on the AstroJet 1000P.
In normal operation, the printing is read from the operator side of the Printer. It is sometimes necessary to
turn the printing direction 180 degrees from the normal direction. This occurs when, due to the layout or
the method of binding, the media must be fed in the reverse direction.
Clicking Paper tab, then Paper Source permits you to reverse the print direction 180 degrees.
Remaining settings on this tab should be left as they are. Paper size is always “Max Print Area” and
Orientation is always “Portrait”. Do not change them.