Troubleshooting guide

SECTION 3

OPERATING THE PRINTER

To start printing, click File, then Print. The Print

window opens. To print the job, click OK. To use the

special features built into the Address Printer 5

drivers, click the Properties button to open the

Properties Window in Windows 95, 98, NT, or ME.

If you are using Windows 2000 or XP, the window at right

opens. Clicking Advanced opens the “Options” window. In

the following illustrations the windows for Windows 95, 98,

NT, and ME will be on the left. The windows for Windows

2000 and XP will be on the right.

When the Properties window opens

you are presented with several Tabs

in Windows 95, 98. The following

are standard Windows Printer Driver

functions and should be left at their

defaults: Graphics, Fonts, and

Device Options. The Features and

Print Heads tabs are used to set up,

change, and adjust the Printer.

Features Tab

Features Tab/Advanced Options,

(depending on the operating

system), is used to change speed

and resolution of the Printer, to

add a delay to the feed to provide

separation between the pieces, and

to print and overlay with the job.

First feature, “Print Quality” has

two settings: (1) Resolution of

print quality, (2) for appropriate

Speed. Changing resolution to a

higher number (e.g. 200 DPI to

600 DPI) increases image quality.

When resolution is changed, Belt

Speed (IPS) is automatically changed to the optimum speed for the resolution selected.