Specifications

2
1
PRINT HEAD COVER – Shown open for illustration purposes, but should be in the closed
position for running.
2
PARALLEL PORT – The printer cable from your computer should be connected here.
3
MEDIA TRANSPORT BELTS – The media is transported under the printheads on these belts.
4
PRINTHEAD CARRIAGE – The AstroJet 1000 has four printheads. Head 1, 2, and 3 are
banked together on the rail. Head 4 shares the same rail, but is opposite and independent of
the other heads.
You can move the two printing banks from side to side to position the information properly on
the media with the following restrictions. Heads 1, 2, and 3, print a band 1-1/2 inch wide and
may be positioned anywhere within a range of 2-1/2 inches from the Control Panel side of the
printer to 4 inches from the opposite side of the printer. Head 4 can be positioned to within 1-
3/4 inches of head 3 and to within 2-1/2 inch of the non-operator side of the printer.
5
MEDIA SENSOR – The media sensor is located just before the printheads and senses the
media to start the printing action.
1
5
2
3 4