Specifications

46
Printing without a Database
It is possible to print return addresses on envelopes, logos, and other information on media without a
database. One application would be to put the return address on the flap of an envelope. To do this
select a the New Template icon
or New… from File menu and
when the Layout Editor – Select
Database window appears
deselect the “Does this template
require a database?” Then click
OK.
The “Layout Editor – Stock
Properties” window will open.
Select the size of the envelope
and click OK as you normally
would.
Click on Setup and then Print
head and deselect Heads 5
through 8 as you would for a
normal template. Then deselect
head 4 as well for this example
as we will be printing on a 6 3/4
envelope which is only 3.5 inches wide and will not accommodate printhead 4 due to the required 1
3/4-inch space between heads 3 and 4. When you have completed these steps the layout should look
like the one below.