SOFTWARE SP-8848 User Manual

V-chip Setting screen
No. Item Details
①
CC setting display This is pressed to display the closed caption setting screen.
②
Tool buttons ● Load: Press this to load the data from a file.
● Save: Press this to save the edited data in a file.
● Send: Press this to send the edited data to the VG generator, and register it in
the generator.
● Receive: Press this to receive data from the VG generator.
③
Program No The number of the program which has been sent or received appears here.
④
System This is where the system setting is selected. OFF,MPAA, U.S. TV, Canadian
English or Canadian French can be set.
⑤
Rating This is where the rating classifications are set. The items which can be set differ
depending on the system.
● MAPP: G., PG, PG-13, R, NC-17, X
● U.S.TV: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, TV-MA
● English: E, C, C8+, G, PG, 14+, 18+
● French: E, G, 8ans+, 13ans+, 16ans+, 18ans+
This is where the U.S. TV extension system is selected. None, FV, V, S, L or D can
be set.
⑥
Interval This is where the interval at which the rating data is to be sent is set. Any interval
from 0 to 1023（v） can be set
⑦
UserNo The closed caption pattern number is set here.
⑧
LoopTime Displays the caption data that was looped by every setting value. Any LoopTime
from 0 to 10 seconds can be set.
⑨
Delay Starts the display of the Caption data after the fixed time. Any Delay from 0 to 10
seconds can be set
⑩
DefaultData Select the Mode and Style settings for the default caption data output.
⑪
Help This is pressed to display the help information.
⑫
Close This is pressed to close the program.
* For further details on the settings, refer to the instruction manual of the VG generator (VG-858).
112