Specifications

./4%$)!'2!-3),,5342!4)/.3!2%./44/3#!,%
27
)../6!4)6%(%!24(02/$5#43s$)2%#46%.4'!3&)2%0,!#%3-ONTEBELLO$,8-ONTEBELLO$,8#$s).34!,,!4)/.).3425#4)/.3
Figure 50—Burner Flame Appearance
Oak Logs Shown
Figure 49—Burner Flame Appearance
4OADJUSTTHEmAMEROTATETHEAIRSHUTTERTOWARD
THEBACKORTOWARDTHEFRONTOFTHElREPLACE
Position the air shutter to the factory setting as
SHOWNINTHETABLEINFigure 48!LLOWTHEBURNER
TOOPERATEFORATLEASTMINUTES/BSERVETHE
mAMECONTINUOUSLY)FITAPPEARSWEAKORSOOTY
ASPREVIOUSLYDESCRIBEDADJUSTTHEAIRSHUTTER
until the flame appearance is as desired.
Use the remote to adjust the flame height
as desired.
0ROPANEMODELSMAYEXHIBITAmAMEPATTERN
that may candle or appear stringy. If this is
PROBLEMATIC OR PERSISTS AS THE APPLIANCE IS
CONTINUALLY OPERATED ADJUST THE AIR SHUTTER
CLOSEDASDESCRIBEDINTHEPREVIOUSPARAGRAPHS
Operate the appliance for a period of time as the
effect diminishes, ensuring that the appliance
DOESNOTDEVELOPSOOTYmAMES7HENSATISlED
that the appliance operates properly, proceed
TOlNISHTHEINSTALLATION
CAUTION
Soot will be produced if the air
shutter is closed too much. Any
damage due to carboning result-
ing from improperly setting the
air shutter is not covered under
the warranty.
Air Shutter
Opening
Burner
Orifice
Gas
Valve
Venturi
Venturi
Main Burner Factory Air Shutter
Opening Setting—Inches (millimeter)
Model Nat.Gas Propane Gas
40 in.
1/16 (1.59) 9/32 (7.14)
45 in.
1/16 (1.59) 9/32 (7.14)
Figure 48
WARNING
s Air shutter adjustment should
only be performed by a quali-
fied professional service
technician.
s Ensure that the front glass
door assembly is in place and
sealed After adjustment.
Burner Air Shutter Adjustment Procedure
Contemporary Media Shown