Installation & Assembly

I. Carefully place the table top (#1) onto a
protected surface.
II. Align the table legs (#2) to the pre-drilled
holes located on the corners of the table
top (#1).
III. Prepare 8 bolt assemblies by FIRST
inserting the lock washer (#B) onto the
bolt (#A) then the flat washer (#C) onto
that same bolt (#A). Secure using the
Allen wrench (#D).
Carefully turn the completed table upright. Make sure the table is rested on a flat surface and does
not feel loose or wobbly. If it does, double check that the bolts are secured and properly tightened.
ASSEMBLY IS COMPLETED