Installation & Assembly

A.CHEST 1 SET

SHORT SCREW

1PC

2 LONG SCREW 1PC

CABLE TIE

1PC

L BRACKET

2PCS

STEP 2

STEP 1

STEP 3

PAGE 2 OF 2

ANTI - TIPPING KIT

PARTS IDENTIFICATION HARDWARE IDENTIFICATION

This tip restraint must be attached to a wall stud

using long screw enclosed.

Locate the other bracket on the wall over a wall stud and two

inches below the mounting bracket secured to the back of chest.

Attached to the wall stud using the long screw provided, through

the smaller hole

Place the chest into position so both mounting brackets are vertically in line. Lace the end of the restraint strap through the larger hole

in each mounting bracket. Bring both ends together and slide the flat end through the locking end and draw it through until all slack is

removed. Confirm that the strap is securely laced and locked.

Attach a bracket securely to the back top rail of the chest using short

screw provided, through the smaller hole.

WALL