Assembly Instructions

1. Place the leg support
(#3) face down onto
a protected surface.
2. Prepare 4 bolts by first
inserting a lock washer
(#C) onto the bolt (#A)
then a flat washer (#B)
onto that same bolt (#A).
3. Place the base (#4) face down onto
the leg support (#3), then insert 4
bolt assemblies into the center.
Secure using the Allen wrench (#D).
After that insert the threaded ends
of the foot (#5) into the corner
holes. Turn right to tighten.
2. Prepare 4 bolts by first
inserting a lock washer
(#C) onto the bolt (#A)
then a flat washer (#B)
onto that same bolt (#A).
3. Place the support panel
(#2) onto the top of the leg
support (#3), then insert 4
bolt assemblies into the
center holes. Secure using
the Allen wrench (#D),
1. Turn the bottom
assembly upright.