Assembly Instructions

Turn right (clockwise) to tighten

Page 4 of 5

#A x 4 pcs

#D x 4 pcs

#E x 4 pcs

#C x 1 pc

#D x 1 pc

#E x 1 pc

I. Align the seat (#2) with the

pre-drilled holes of the

backrest with legs (#1).

II. Prepare 4 bolt assemblies by

inserting FIRST the lock

washer (#D) onto the bolt (#A)

and then the flat washer (#E)

onto the SAME bolt (#A), in

that order.

III. Insert the bolt assemblies

through the pre-drilled holes in

the corners of the seat (#2)

and secure those bolts using

the Allen wrench (#F) to lock

them in with the backrest with

legs (#1).

I. Prepare a bolt assembly by inserting FIRST the lock washer (#D)

onto the bolt (#C) and then the flat washer (#E) onto the SAME

bolt (#C), in that order.

II. Insert the bolt assemblies through the center hole of the seat (#2)

and secure that bolt using the Allen wrench (#F) to lock it in with

the backrest with legs (#1).