Assembly Instructions

1) Prepare 2 bolts assembly by inserting lock washer (#D),
then flat washer (#E) onto bolts (#A). Align seat (#2) to the
holes of the chair back (#1). Secure middle two holes by using
bolts (#A).
DO NOT FULLY TIGHTEN ALL
BOLTS UNTIL ASSEMBLY IS
FULLY COMPLETED.
2) Prepare 4 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#C).
Secure corner holes of seat (#2) to chair back (#1) by using bolts (#C).
Prepare 4 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#B).
Align front legs (#3) to the holes of the seat (#2), then secure by using bolts (#B).