Assembly Instructions

Turn right (clockwise) to tighten
Page 5 of 5
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
I. Align the front legs (#3) with
the pre-drilled holes on the
corners of the seat (#2).
II.
Prepare 4 bolt assemblies
by
inserting FIRST the lock
washer (#D) onto the bolt
(#B) and then the flat washer
(#E) onto the SAME bolt
(#B), in that order
.
III.
Insert the bolt assemblies
through the pre-drilled holes
in the corners of the seat (#2)
and secure those bolts using
the
Allen wrench (#F)
to lock
them
in with the front
legs
(#3).
Carefully turn the completed chair upright. Make sure the chair
is rested on a flat surface and it does not feel loose or wobbly.
If it does, double check that the bolts are secured and properly
tighten.
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR.