Assembly Instructions

Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 4 of 5
#A x 4 pcs
#D x 4 pcs
#E x 4 pcs
#C x 1 pc
#D x 1 pc
#E x 1 pc
I. Align the seat (#2) with the
pre-drilled holes of the
backrest with
legs (#1).
II. Prepare 4 bolt assemblies
by
inserting FIRST the lock
washer (#D) onto the bolt (#A)
and then the flat washer (#E)
onto the SAME bolt (#A), in
that order.
III. Insert the bolt assemblies
through the pre-drilled holes in
the corners of the seat (#2)
and secure those bolts using
the
Allen wrench (#F)
to lock
them
in with the backrest
with
legs (#1).
I. Prepare a bolt assembly by inserting FIRST the lock washer (#D)
onto the bolt (#C) and then
the flat washer
(#E) onto the SAME
bolt (#C), in
that order.
II. Insert the bolt assemblies through the center hole of
the seat (#2)
and secure that bolt using the
Allen wrench (#F) to lock it in
with
the backrest with legs (#1).