Technical data

ASTi ACE Studio Cold Start Procedure (Ver. 2, Rev. J)
12 Copyright © 2011 Advanced Simulation Technology inc.
5. At the prompt type:
sh /media/install
6. The prompt will read “Attempting to install ACE Studio, continue [Y/N]” press ‘Y’ and
then press enter.
The screen below will display after the installation is complete.
7. After the installation is complete type:
eject
8. Close the terminal.
9. Then navigate to System > Shutdown and click “Restart” to reboot.
Note: The ACE Studio default login username and password are as follows:
Username: aceuser Password: aceuser