Technical data

ASTi ACE Studio Cold Start Procedure (Ver. 2, Rev. J)
Copyright © 2011 Advanced Simulation Technology inc. 11
Appendix A: Installation Instructions for Older
Software Versions
Installing RHEL Software
These steps are for ASTi software versions 4.1 – 4.9.
1. Power on the system via the power switch.
2. Hold down the ‘ALT’ key while inserting the RHEL DVD (previously titled ASTi DVD
1). Skip this step if you are cold starting the 2U platform.
3. Select the DVD Windows icon to boot from the DVD.
4. At the prompt type
studio
5. Wait for the installation to complete.
6. The DVD will automatically eject, remove the DVD and select “Reboot.”
Installing ACE Studio Software
These steps are for ASTi software versions 4.1 – 4.4.
Note: If you are installing ACE software versions 4.5 or above please see section “4.2. Installing
ACE Software.”
Before proceeding with this installation, complete section “Installing RHEL Software” located
in this Appendix.
1. Login with:
username: root password: abcd1234
2. Insert the ASTi DVD (previously titled ASTi DVD 2).
3. Open a terminal by navigating to Applications > Accessories > Terminal.
4. To mount the DVD type:
mount /dev/dvd /media