Technical data

ASTi Telestra 4 Quick Start (Ver. 1, Rev. E)

4. On the development station or a computer on the network with a web browser, open the

browser and in the address bar type the IP address of eth0 on the Target into the browser.

Note: Depending on your web browser and browser version, the browser may show a

failed connection due to a self signed security certificate. Bypass the warning by following

the prompts to add a security exception.

5. The main RMS page will open in the browser.

6. Select Network > ACUs, ACU2s, or ACE-RIU and the device(s) connected to the

ACENet switch should appear on the main device(s) page, as shown below.