Technical data

ASTi Telestra MBV Quick Start Guide (Ver.2 Rev. C)

4.4. Channel Handle

The channel handle tool is used to create internal buses (also referred to as channel handles and

intercom channels) within a model in order to route audio signals between various model compo-

nents. Only intercom and radio components can directly put or pull audio on or from an audio bus.

The IcomTx and IcomRx are used to connect the rest of the components (excluding intercom and

radio) to an audio bus channel.

For a detailed tutorial on using the channel handle editor with a mixer component see section 9.4

Tutorial 4- Mixer and Channel Handles in the MBV Training Guide (DOC-01-MBV-BTM-1).