Technical data

ASTi Telestra MBV Quick Start Guide (Ver.2 Rev. C)

8. Return to the

Hardware > Mapping

page to set the gain and input settings for each Iris

channel. Click the “

Settings

” button next to an Iris to open the Iris Model Settings win-

dow. Set the gain and input settings in accordance with the hardware that is plugged into

each channel.

WARNING

: Selecting DC power will place a voltage on the line that can damage hard-

ware if improperly selected.

DC power should only be used for microphones that

require power for operation.

Consult ASTi for recommended settings.

Note that a Telex PH-44 headset should have gains from 15-20 dB with the Input Preamp

turned on.