Technical data

ASTi Telestra MBV Quick Start Guide (Ver.2 Rev. C)
16 Copyright © 1999-2008 Advanced Simulation Technology inc.
4. From this screen navigate to the Hardware > Mapping screen. You will see a list of Irises
and quite a few “
Map it ” buttons. The number of Irises shown on this screen will depend
on the number of Irises that are in the model, not the number of Irises connected to the
Telestra.
5. Select the “
Map it ” button to the right of the first Iris (or any of the Irises). This will open
the
Iris Hardware Assignments page. On this screen you will see the name of the
model’s Irises (highlighted in blue) with a drop down list containing all the serial numbers
of the Irises actually connected to the Telestra. All the Iris connections will be listed by
serial numbers under the “
On-Wire Iris Devices ” column, just to the right of the Model
Iris Names.