Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
88 Copyright © 2014 Advanced Simulation Technology inc.
5.7. Ident
Summary: The Ident component, similar to the Radio > MorseKeyer component
provides an interface between the HostIn packet and the model for any 4 character
ASCII string identifier sequence.
Description: The Ident component decodes the incoming zero terminated ASCII
string into the correct sequence of on/off pulses required for ident code
communication. In addition to the usually letters and numbers defined in the Morse
code, it also includes the characters (* and -) to represent individual dot and dash
combinations. Offset to input variable from beginning of Ethernet packet, in bytes.
Control Inputs
Carrier-
Mode
Type Default Value
boolean False
Description: Provides control of carrier wave state gaps in identi-
fier. When True the identifier has spaces appended to the front and
back of the string, and the carrier wave is on when not keying Morse
string.
Ident
Type Default Value
ident n/a
Description: Controls the Ident from the host in.
Inverted
Type Default Value
boolean False
Description: Provides local logic inversion of keying.
Repeat-
Rate
Type Default Value
uint16 1
Description: Repeat period in seconds for retransmission of Morse
code string.
Modifier: 5
Control Inputs
WordRate
Type Default Value
uint8 1
Description: Determines the rate at which the word is played. Units
are in dots per second. The faster the rate the higher the number.
Modifier: 8
Control Outputs
Result
Type Default Value
boolean False
Description: Output of morse code toggle tone.