Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
74 Copyright © 2014 Advanced Simulation Technology inc.
Control Inputs
OutCon-
trolR
Type Default Value
uint8 255
Description: Selects the busses from which to receive the Rx sig-
nals routed to the OutSignalR. For example, a value of 1 will receive
on Sig1, a value of 2 on Sig2, 4 on Sig3, 8 on Sig4, 16 on Sig5, and
255 on all busses.
SideCon-
trolL
Type Default Value
uint8 255
Description: Selects the busses from which to receive the sidetone
signal routed to SideSignalL. For example, a value of 1 will receive
on Sig1, a value of 2 on Sig2, 4 on Sig3, 8 on Sig4, 16 on Sig5, and
255 on all busses.
SideCon-
trolR
Type Default Value
uint8 255
Description: Selects the busses from which to receive the sidetone
signal routed to SideSignalR. For example, a value of 1 will receive
on Sig1, a value of 2 on Sig2, 4 on Sig3, 8 on Sig4, 16 on Sig5, and
255 on all busses.
Sidet-
oneLocal
Type Default Value
uint8 0
Description: Selects which sidetone signals are generated locally
vs. remotely. If more than one comm panel is sharing the same inter-
com bus, this control determines if the sidetone is shared with the
other panels.
Control Inputs
SideGain-
Control
Type Default Value
uint8 255
Description: Selects which sidetone signals are affected by the
comm panel’s received signal gains. When bit is high, sidetone vol-
ume for the intercom bus is multiplied by the appropriate
SigN_RxGainL or SigN_RxGainR, and by outgain bytes which is
masked by OutControl bytes.
Sig1_RxG
ainL-
Sig8_RxG
ainL
Type Default Value
float32 1.0
Description: Volume control that scales the signal received from
each intercom bus prior to mixing into left output signal.
Sig1_RxG
ainR-
Sig8_RxG
ainR
Type Default Value
Description: Volume control that scales the signal received from
each intercom bus prior to mixing into right output signal.
Sig1-Sig8
Type Default Value
id unassigned
Description: Selects the intercom bus handle.