Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 73
4.2. CommPanel8Stereo
Summary: Simulation of a stereo communication control panel used to link a
single operator to up to 8 assets. A facility is provided for separate control of input,
output and sidetone routing to and from assets. Assets are linked to the comm panel
component using the intercom service. This component has separate controls for
left and right output and sidetone signals.
Description: This is a generic CommPanel component with stereo function. See
the CommPanel component description for more information.
Audio Inputs
InSignal
Type Default Value
audio n/a
Description: Input audio signal that is going to be transmitted by the
Comm Panel.
Control Inputs
Power
Type Default Value
boolean True
Description: Controls the power of the comm panel.
PTT
Type Default Value
boolean True
Description: Controls comm panel audio transmission.
Control Inputs
InGain
Type Default Value
float32 1.0
Description: Scales the In audio signal.
OutGain
Type Default Value
float32 1.0
Description: Volume control that scales the received Out signal
obtained after mixing the received signals from each intercom bus.
Sidet-
oneGain
Type Default Value
float32 0.600
Description: Scales the Side (sidetone) signal obtained after mixing
the received sidetone from each IC bus.
InControl
Type Default Value
uint8 255
Description: Selects the intercom busses to transmit the In Signal
(bitmask). For example, a value of 1 will transmit on Sig1, a value of
2 on Sig2, 4 on Sig3, 8 on Sig4, 16 on Sig5, and 255 on all busses.
OutCon-
trolL
Type Default Value
uint8 255
Description: Selects the busses from which to receive the Rx sig-
nals routed to the OutSignalL. For example, a value of 1 will receive
on Sig1, a value of 2 on Sig2, 4 on Sig3, 8 on Sig4, 16 on Sig5, and
255 on all busses.