Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
70 Copyright © 2014 Advanced Simulation Technology inc.
The duplex behavior of any asset may be set based on the setting of the Full Duplex
input and/or modifier. Default operation is full duplex. Asset connection duplex
behavior will always force local behavior, so connections to a normal radio will
force half-duplex operation.
The OutGain control and scaling factor determines the overall receive signal gain.
The SidetoneGain control and scaling factor determines the overall sidetone signal
gain.
Power connection state determines whether the object is operational or not. All
operation disabled when power is off (FALSE).
Audio Inputs
InSignal
Type Default Value
audio n/a
Description: Input audio signal that is going to be transmitted by the
Comm Panel.
Control Inputs
InControl
Type Default Value
uint 255
Description: Selects the intercom busses to transmit the In Signal
(bitmask). For example, a value of 1 will transmit on Sig1, a value of
2 on Sig2, 4 on Sig3, 8 on Sig4, 16 on Sig5, and 255 on all busses.
Modifier: AND
Modifier_default: 255
Range: 0 -255
InGain
Type Default Value
float 1.0
Description: Scales the In audio signal.
Modifier: Multiply
Modifier_default: 1.0
Range: 0.0-1.0
OutCon-
trol
Type Default Value
uint 255
Description: Selects the busses to receive audio from (bitmask). For
example, a value of 1 will transmit on Sig1, a value of 2 on Sig2, 4
on Sig3, 8 on Sig4, 16 on Sig5, and 255 on all busses.
Modifier: AND
Modifier_default: 255
Range: 0 -255
Control Inputs
OutGain
Type Default Value
float 1.0
Description: Volume control that scales the received Out signal
obtained after mixing the received signals from each intercom bus.
Modifier: Multiply
Modifier_default: 1.0
Range: 0.0 -1.0
Control Inputs