Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 63
Audio Inputs
InSignal
Type Default Value
audio n/a
Description: InSignal is the input signal into the Vox component.
The filter and the Vox logic will be applied to this signal to deter-
mine the output signal.
Control Inputs
OutGain
Type Default Value
float32 1.0
Description: OutGain applies amplitude gain control to the primary
output signal. If no external control is connected to OutGain, the
scale factor is used as the OutGain value.
Modifier: Multiply
Modifier_default: 1.0
PTT
Type Default Value
boolean False
Description: In PTT mode, the input signal is output only when
PTT is set. When PTT is set in Vox mode, the Vox component
behaves as if in Hot Mic mode (i.e. it will always output the signal).
If no external control is connected to PTT, the XOR modifier is used
as the PTT value.
Modifier: XOR
Modifier_default: FALSE
Control Inputs
VoxEnable
Type Default Value
boolean False
Description: VoxEnable is the control flag for Vox mode. If this
variable is set to false, the Vox component is configured for PTT
mode. If no external control is connected to VoxEnable, the XOR
modifier is used as the VoxEnable value.
Modifier: XOR
Modifier_default: TRUE
VoxLevel
Type Default Value
float32 0.0
Description: VoxLevel provides the Vox threshold level. When Vox
mode is enabled, the input signal level is compared to VoxLevel and
fed through only if it exceeds it. If no external control is connected
to VoxLevel, the offset is used as the VoxLevel value.
Modifier: ADD
Modifier_default: 0.002
Audio Outputs
OutSignal
Type Default Value
audio n/a
Description: Outsignal is the output signal from the Vox compo-
nent.