Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
56 Copyright © 2014 Advanced Simulation Technology inc.
Audio Outputs
SignalOut
Type Default Value
audio n/a
Description: Output signal of the Record Replay component. Audio
level is controlled by the gain variable and read from the raw audio
record/replay file. Audio is only output when in replay mode.
Control Outputs
Current
Position
Type Default Value
int32 0
Description: The current position displays the position of the file in
milliseconds. This control is updated as the component records or
replays audio. If the component stops the audio, the position will
hold at its current value until replay or recording restarts.
Current
FileLength
Type Default Value
int32 0
Description: After a recording this displays the current file length in
milliseconds of the selected record/replay file.
FileMode
Type Default Value
player_state STOPPED
Description: Displays the stopped recording or playing state of the
file. Displays “RECORDING” when the file is recording and dis-
plays “REPLAY” when file is replaying.
MaxFile-
Length
Type Default Value
int32 0
Description: Displays the maximum file length in milliseconds.
MaxFileLength is based on the length setting.
New Posi-
tion
Type Default Value
int32 0
Description: The point in the file where it will resume if it begins
recording or replaying.
Position
Offset
Type Default Value
int32 0
Description: The Position Offset matches the position input and dis-
plays in milliseconds.
Control Outputs