Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
44 Copyright © 2014 Advanced Simulation Technology inc.
Audio Input
GainMod
Type Default Value
audio n/a
Description: Provides a connection to a signal which will modulate
the amplitude of the pulse sequence.
Sweep
Mod
Type Default Value
audio n/a
Description: Provides the audio input connection for the
modulation of the sweep time.
Control Input
Durations
Type Default Value
float32 1.0
Description: Provide the width of each pulse, in microseconds if in
Fixed mode, or as a fraction of the sweep time in
Fractional mode.
Note: The resolution of the pulse durations is 1/sample rate. For a
sample rate of 48kHz, the resolution is 20.8333 microseconds.
Gain
Type Default Value
float32 1.0
Description: Amplitude gain of pulse. If the gain connection is
blank then the gain scale factor is used as the gain value, else the
gain is the scale factor times the output result of the control object.
Control Input
GainMod
En
Type Default Value
boolean false
Description: Control parameter to enable connection to provide
amplitude gain control from elsewhere in model.
Paint
Count
Type Default Value
uint8 0
Description: The paint count is the number of pulses in a sweep.
Allowable values are from 1 to 8. A value of 0 disables the pulse
sequence.
Sweep-
ModEn
Type Default Value
boolean false
Description: Control parameter to enable connection to provide
sweep modulation control from elsewhere in model.
Sweep
Mod
Depth
Type Default Value
float32 0.0
Description: Provides the modulation depth for the sweep modula-
tion signal. This should be between 0 and 1. A one means that if the
modulation signal has a gain of 1, then the sweep time (or fre-
quency) will get modulated between zero and twice it's normal
value. A modulation depth of zero means that no sweep modulation
will occur.