Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
42 Copyright © 2014 Advanced Simulation Technology inc.
Control Inputs
Frequency
Type Default Value
float32 1.0
Description: Frequency (in Hertz) of wave generated by the
waveform synthesizer. The frequency is the number of oscillations
made per second for the given waveform. If no external variable is
connected to Frequency, the value of the scaler is used.
Modifier: Multiply
Modifier_default: 0.0
Range: 0.0 - 1/2*Sample Rate
FreqMod-
Depth
Type Default Value
float32 1.0
Description: Frequency modulation depth value, controls the effect
of the frequency modulation signal. If no external variable is
connected to FreqModDepth, the value of the scaler issued is the
frequency modulation depth. To avoid unpredictable behavior care
should be taken to ensure that the product of modulation depth and
modulation signal does not span a range greater than -1.0 to +1.0.
Modifier: Multiply
Modifier_default: 0.0
Range: 0.0-1.0
FreqMod-
Signal
Type Default Value
boolean False
Description: Frequency modulation signal, controls the actual gen-
erated frequency. To avoid unpredictable behavior care should be
taken to ensure that the product of modulation depth and modulation
signal does not span a range greater than -1.0 to +1.0.
Control Inputs
Gain
Type Default Value
float32 1.0
Description: Amplitude gain of the waveform. If no external
variable is connected to Gain, the value of the scaler is used.
Modifier: Multiply
Modifier_default: 0.0
Range: 0.0 - Inf
Mark-
Space
Ratio
Type Default Value
float32 1.0
Description: The pulse width or mark to space ratio of the wave.
The pulse is positive relative to the period of the wave. (e.g. a value
of 0.5 means in a given period, the pulse output will be +Gain for
half of the time and zero for the other half). If no external variable is
connected to MarkSpace, the value of the scaler is used.
Modifier: Multiply
Modifier_default: 0.5
Range: 0.0 - 1.0
Audio Outputs
OutSignal
Type Default Value
audio n/a
Description: OutSignal is the output signal from the pulse compo-
nent, which may be connected to another component or directed to
an output highway.