Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
18 Copyright © 2014 Advanced Simulation Technology inc.
Control Input
LimSi-
deEnable
Type Default Value
Boolean False
Description: This control determines whether the envelope, with
which the limiter performs its gain control logic, will be based on
the signal from SideIn (True) or InSignal (False).
LimOut-
Gain
Type Default Value
float32 1.0
Description: This sets the linear gain factor for the output of the
limiter module. This gain is applied even if the limiter is not
enabled.
LimRe-
lease
Type Default Value
float32 100.0
Description: This is the release time (in milliseconds) of the limiter.
The longer this time is the longer it will take for the effect of the
limiter to wear off after the input signal level falls below the
threshold.
LimThres
hold
Type Default Value
float32 0.0
Description: This is the specified level that the signal will be
limited to. Values are in dB.
Audio Outputs
OutSignal
Type Default Value
audio n/a
Description: The signal after being processed by the entire com-
pressor component.
Internal Parameters
CompOut-
Signal
Type Default Value
audio n/a
Description: The signal after being processed by the compressor
module.
GateOut-
Signal
Type Default Value
audio n/a
Description: The signal after being processed by the gate module.
E
XOutSig-
nal
Type Default Value
audio n/a
Description: The signal after being processed by the expander
module.