Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 232
Internal Parameters
Device-
Name
Type Default Value
device_id n/a
Description: Select the name of the ACE-RIU device.
Device
Channel
Type Default Value
riu_channel n/a
Description: Select the ACE-RIU serial channel; serial channels
can be either A or C.
Radio
Handle
Type Default Value
string n/a
Description: Enter a useful handle to help identify this radio object.
The handle is useful when using the RMS Remote Control
interface.
radio.log_
level
Type Default Value
uint32 0
Description: Set this parameter to affect how much logging the
component outputs. As of this writing, only a level of 1 is
supported. It is recommended that this parameter be set to 0 if one is
not actively debugging the component or the live radio interface as
spurious log output will be produced. Looking at the log is useful
for identifying specific commands that are unresponsive.
Note: This parameter is only accessible through the full view.