Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 228
Control Inputs
RCU_
Preset
Type Default Value
uint8 0
Description: Set the live radio preset to switch to. Valid presets are
in the range of 0-9.
RCU_
Freq
Type Default Value
uint64 0
Description: Set the live radio frequency to tune to. Valid frequen-
cies will vary depending on other factors; refer to the radio’s opera-
tor manual for more information.
RCU_
TxFreq
Type Default Value
uint64 0
Description: Set the live radio transmit frequency to tune to. The
component will not handle setting the frequency and transmit
frequency in a coupled manner; that is, if one requires the two
frequencies to be the same he must set both of them separately.
Valid frequencies will vary depending on other factors; refer to the
radio’s operator manual for more information.
RCU_
Squelch
Type Default Value
uint8 255
Description: Set the live radio squelch level. Values in the range 0 -
255 are valid, with 255 being the highest level.
Control Inputs
RCU_
Power-
Level
Type Default Value
uint8 0
Description: Set the live radio power level. There are three possible
settings:
0 – LO
1 – MED
2 – HI
Some settings are not possible in all cases; refer to the radio’s
operator manual for information on setting the power level.
RCU_
TextMode
Type Default Value
uint8 0
Description: Set the live radio text mode. There are two possible
settings:
0 – PT (plain text)
1 – CT (cipher text)
RCU_
ModMode
Type Default Value
uint8 0
Description: Set the live radio receive modulation mode. There are
two possible settings:
0 – AM
1 – FM
Some settings are not possible in all cases; refer to the radio’s
operator manual for information on setting the modulation mode.