Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 216
Control Outputs
TxActive
Type Default Value
boolean False
Description: Indicates whether the Transceiver is transmitting.
TxVoice
Type Default Value
boolean False
Description: Indicates when the Transceiver is transmitting audio.
TxTDL
Type Default Value
boolean False
Description: Indicates when the Transceiver is transmitting data.
TxCrypt
Type Default Value
boolean False
Description: Indicates when the Transceiver is in crypto mode and
actively transmitting.
TxFreq
Type Default Value
uint64 0
Description: Indicates the Transceiver transmit frequency.
Internal Parameters
Domain-
Name
Type Default Value
string blank
Description: The DomainName is part of the ASTiNet property set
and defines a common communications environment. All transceiv-
ers within the same domain have the ability to communicate and
Transceivers in separate domains can never communicate. It is anal-
ogous to a DIS Exercise ID or an HLA Federation name. When
defined as an ASCII string the Transceiver is natively an ASTiNet
Radio. When that string matches a defined DIS domain (at the proj-
ect level) it will map the domain name to a DIS exercise ID.
As a shortcut, define a DIS Exercise ID by entering “DIS:N”, where
N = 1 thru 255. For example, “DIS:1” would put the Transceiver in
DIS Exercise ID 1. If this shortcut is used, you must ensure that the
Exercise ID is not already in use by any DIS domain created in the
Domain Editor.
Important: This parameter is required.
PowerBus
Type Default Value
id UNASSIGNED
Description: Connects to the Power Service and is used in conjunc-
tion with Power Service to receive power instead of using a control.