Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 211
Audio Inputs
External-
Noise
Type Default Value
audio n/a
Description: Attach an input signal to replace the NoiseSource.
Overrides the white noise generator if signal is attached and active.
RxTune-
Tone
Type Default Value
audio n/a
Description: Local audio connection that will be mixed into the
receive audio path of the radio.
TxAudio
Type Default Value
audio n/a
Description: Local audio connection to the Transceiver transmit
audio stream.
Control Inputs
Antenn-
aGain
Type Default Value
float32 1.0
Description: The linear antenna gain applied to the radio receive
signal.
Cableloss
Type Default Value
float32 1.0
Description: The loss factor representing the antenna cable, a value
of 1.0 represents no loss.
Control Inputs
BFOGain
Type Default Value
float32 1.0
Description: The gain associated with the BFO audio.
BFOFre-
quency
Type Default Value
float32 0.0
Description: Beat Frequency Oscillator (BFO) in the Transceiver.
The BFO has a tone strength that is proportional to the received car-
rier strength, generally used for detecting the Morse code keying
present on a continuous wave beacon.
Crypto-
Group
Type Default Value
float32 1
Description: Allows for host control between different crypto
groups as defined in the sound library. For example, a user may
change from a KY-28 to a KY-58.
Crypto
Gain
Type Default Value
float32 1
Description: The gain level of the crypto sound.
Crypto
Enable
Type Default Value
boolean True
Description: Allows a user to disable crypto even when crypto
parameters are enabled in the Transceivers associated RCU.