Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
206 Copyright © 2014 Advanced Simulation Technology inc.
Control Inputs
Passband
Type Default Value
uint64 0
Description: Defines the frequency range of the satellite uplink and
downlink bands in Hertz.
TxPower
Type Default Value
float32 1.0
Description: The transmit power for the satellite downlink trans-
mitter in Watts.
Channels
Type Default Value
uint32 1
Description: Number of simultaneous channels that can be sup-
ported by the satellite.
Fixed-
Delay
Type Default Value
uint32 0
Description: Overrides mode based delays and forces a fixed delay
value. Specified in ms.
Delay5k
Type Default Value
uint32 0
Description: Delay applied between when the satellite receives an
uplink signal and when it transmits the downlink signal when in
SATCOM 5k mode. Specified in ms.
Control Inputs
Delay5kD
ASA
Type Default Value
uint32 0
Description: Delay applied between when the satellite receives an
uplink signal and when it transmits the down link signal when in
SATCOM 5k DASA mode. Specified in ms.
Delay5kD
AMA
Type Default Value
uint32 0
Description: Delay applied between when the satellite receives an
uplink signal and when it transmits the down link signal when in
SATCOM 5k DAMA mode. Specified in ms.
Delay25k
Type Default Value
uint32 0
Description: Delay applied between when the satellite receives an
uplink signal and when it transmits the down link signal when in
SATCOM 25k mode. Specified in ms.
Delay25k
DCDASA
Type Default Value
uint32 0
Description: Delay applied between when the satellite receives an
uplink signal and when it transmits the down link signal when in
SATCOM 25k DCDASA mode. Specified in ms.
Delay25k
ACDAMA
Type Default Value
uint32 0
Description: Delay applied between when the satellite receives an
uplink signal and when it transmits the down link signal when in
SATCOM 25k ACDAMA mode. Specified in ms.