Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
202 Copyright © 2014 Advanced Simulation Technology inc.
15.10. Relay
Summary: The Relay component is used to link up any pairs of radios from a bank
of eight radios.
Description: The Relay component connects up to eight Transceiver Components
together in order to form radio relays. A radio relay will take all received audio
from a radio and re-transmit out another radio. The Relay Component allows the
user to make up to four pairs of relays across eight radios. In the most basic case,
link the received audio from a transceiver to ReceiveAudio1 of the Relay
Component. The RadioSelector1 field sets which radio that audio gets routed to,
where 2 = TransmitAudio2, 3 = TransmitAudio3, etc.
In the example below, Transceiver 2 and 3 are set as a relay pair, and Transceiver 1
and 4 are also a pair. As in the real world, radios in Relay Mode should have
different frequencies.
Figure 14: Basic Relay Model Example
Figure 15: Relay Host Control
Figure 16: Relay Component
Audio Inputs
ReceiveAu
dio1
Type Default Value
audio n/a
Description: The receive audio from the selected Transceiver routed
into the component.
ReceiveAu
dio2
Type Default Value
audio n/a
Description: The receive audio from the selected Transceiver routed
into the component.