Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
200 Copyright © 2014 Advanced Simulation Technology inc.
15.9. Receiver
Summary: The Receiver component communicates with the Transceiver
component to force receive capability.
Description: The Receiver component is an RCU included in the Radio group. It is
designed to communicate with the Transceiver component to force receive
capability only. It is a subset of the features and controls located inside the
RCUbasic component.
The benefit of using the Receiver over the RCUbasic (or all other all-purpose
RCUs) is that it charges a reduced number of credits for the reduced functionality.
As a result, the component is useful for replicating Guard Receivers and
Navigational Aides such as an ADF Receiver, or a TACAN Receiver.
For more information about using RCUs and the Transceiver, see the preface to the
Radio group and the RCUbasic component.
Control Inputs
CryptoKey
Type Default Value
uint16 0
Description: If two radios are using encryption then they must have
matching crypto keys for the crypto modes. This field must match in
order for proper radio tuning.
Frequency
Type Default Value
uint64 0
Description: The current radio tune frequency in Hz.
Control Inputs
FreqHopN
etId
Type Default Value
uint16 0
Description: Identifies the frequency hopping network.
FreqHopS
yncTOD
Type Default Value
uint32 0
Description: Identifies the Time of Day used in frequency hopping.
FreqHop-
Tran-
SecKey
Type Default Value
uint16 0
Description: Identifies the transmission security key used in gener-
ating hopping patterns.
FreqHo-
pHopSet-
WOD
Type Default Value
uint16 0
Description: Identifies the set of frequencies used in hopping pat-
tern.
FreqHop-
LockOutId
Type Default Value
uint16 0
Description: Identifies the set of frequencies that are excluded from
hopping pattern.
Net
Type Default Value
uint32 1
Description: Net defines the core radio features including fre-
quency, Tx frequency, waveform, crypto, and frequency hopping.
The Net parameters are set in the Comm Plan.