Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 199
Control Inputs
FreqHop
Tran-
SecKey
Type Default Value
uint16 0
Description: Identifies the frequency hopping transmission security
key used in generating hopping patterns. The default of 0 = match
all.
Net
Type Default Value
uint32 1
Description: Selects the Net from the Comm Plan fill. Net defines
the core radio parameters including frequency, Tx frequency, wave-
form, crypto, and frequency hopping. The Net parameters are set in
the Comm Plan.
TxFre-
quency
Type Default Value
uint64 0
Description: The transmitter frequency of the Transceiver in Hz.
For use only if the transmit frequency differs from the receive fre-
quency.
TxPower
Type Default Value
float32 0
Description: The transmit power for the radio.
Control Outputs
FillName
Type Default Value
string n/a
Description: Reports what is entered in the Fill. Typically not con-
nected to an output.
NetIndi-
cate
Type Default Value
uint32 0
Description: Reports what is entered in the Transceiver ID. Typi-
cally not connected to an output.
Internal Parameters
Fill
Type Default Value
fill n/a
Description: Identifies the CommPlan fill to use with the Trans-
ceiver. Insert the fill created in the Comm Plan by double-clicking
under the ‘Value’ column. A radio must have a fill in order to oper-
ate.
Transceiv-
erID
Type Default Value
id UNASSIGNED
Description: TransceiverID tells RCUbasic what Transceiver com-
ponent it should control. The Transceiver must have a matching
TransceiverID.