Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
194 Copyright © 2014 Advanced Simulation Technology inc.
Control Inputs
StrictTim-
ing
Type Default Value
boolean True
Description: When True, MarkerTone uses proper MarkerTone
inter-character timing which is a one (1) dot gap between ident char-
acters and a 2 dot gap after the final character. When False, Marker-
Tone uses standard Morse code inter-character timing which is a
three (3) dot gap between ident characters and a three (3) dot gap
after the final character.
Wordrate
1-2, 4-8
Type Default Value
basic/uint8 8.0
Description: Determines the rate at which the word is keyed.
Wordrate3
Type Default Value
basic/uint8 12.0
Description: Determines the rate at which the word is keyed.
Audio Output
OutSignal
Type Default Value
audio n/a
Description: OutSignal is the output signal from the MarkerTone
component, which may be connected to another component or
directed to an output highway.
Control Output
Active
Type Default Value
boolean False
Description: When keyer is keying a dot or a dash this goes True,
essentially mimicking the ‘beep’ of the keyer.
Busy
Type Default Value
boolean False
Description: When OutSignal is Active Audio, Busy is True.
Internal Parameters
Ident1
Type Default Value
ident T
Description: The identifier played by the keyer when number is
equal to 1. A value of T plays a single dash in Morse Code.
Ident2
Type Default Value
ident A
Description: The identifier played by the keyer when number is
equal to 1. A value of A plays a dot dash in Morse Code.
Ident3
Type Default Value
ident E
Description: The identifier played by the keyer when number is
equal to 1. A value of E plays a single dot in Morse Code.