Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
192 Copyright © 2014 Advanced Simulation Technology inc.
15.6. MarkerTone
Summary: The MarkerTone component provides the ability to add navigational
beacons to a model.
Description: The MarkerTone component provides the ability to add the Outer
Marker, Middle Marker, Inner Marker, and Fan Marker navigational beacons to a
model. The default values are set to FAA standards. While the component provides
four separate beacons, the component can be considered only one of the beacons at
a time. An input control selects which beacon to use.
Control Inputs
Enable
Type Default Value
boolean True
Description: When TRUE MarkerTone is enabled.
Frequency
1
Type Default Value
basic/float32 400
Description: Sets the pitch for the keyed tone when number is set to
1. Default is set to 400Hz for the Outer Marker.
Frequency
2
Type Default Value
basic/float32 1300
Description: Sets the pitch for the keyed tone when number is set to
2. Default is set to 1300Hz for the Middle Marker.
Frequency
3
Type Default Value
basic/float32 3000
Description: Sets the pitch for the keyed tone when number is set to
3. Default is set to 3000Hz for the Inner Marker.
Control Inputs
Frequency
4
Type Default Value
basic/float32 3000
Description: Sets the pitch for the keyed tone when number is set to
4. Default is set to 3000Hz for the Fan Marker.
Frequency
5
Type Default Value
basic/float32 0
Description: Sets the pitch for the keyed tone when number is set to
5.
Frequency
6
Type Default Value
basic/float32 0
Description: Sets the pitch for the keyed tone when number is set to
6.
Frequency
7
Type Default Value
basic/float32 0
Description: Sets the pitch for the keyed tone when number is set to
7.
Frequency
8
Type Default Value
basic/float32 0
Description: Sets the pitch for the keyed tone when number is set to
8.
Gain
Type Default Value
basic/float32 1.0
Description: Gain applies strength to the MarkerTone.