Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
190 Copyright © 2014 Advanced Simulation Technology inc.
Internal Parameters
ProtocolID
Type Default Value
string
Description: The Protocol ID field has a variety of use cases. It
allows a radio to become a DIS radio by setting the DIS identifiers
such as the Host ID and Radio ID. The ProtocolID also allows the
Marking Field to be set, or for the radio to be considered "local" and
not published on the network.
DIS:#.#.#.# - Sets the Site, Application, Entity, and Radio IDs
DIS:#.# - Sets the Entity and Radio ID
DIS:# - Sets the Radio ID
DIS: - Sets all four IDs to be set automatically
LCL: - Sets the radio to be Local and not published on the network.
If any of the above numbers are not set, the remaining Identifiers are
generated automatically. The Site and Application ID are set via the
last two octets of the DIS IP Address. The Entity and Radio IDs are
generated randomly. The above examples can be appended with
another colon and the DIS Marking Field.
For example, DIS:100.3:RedForce1, sets the Entity ID to 100, the
Radio ID to 3, and the Marking Field to RedForce1. The Site and
Application IDs will be set from the IP address.
RxChan-
nel
Type Default Value
uint64 0
Description: Reflects the receive channel set in the ICU.
Internal Parameters
RxAudio
Type Default Value
boolean False
Description: The IntercomTransceiver local audio receive audio
stream, i.e. this is the receiving audio the Intercom Transceiver will
pickup from transmitting intercoms.
Sidetone
Type Default Value
boolean False
Description: Sidetone audio signal generated by mixing all the
received sidetones from the actively selected Intercom busses.
Transceiv-
erID
Type Default Value
id unassigned
Description: Defines the connection between the Intercom Trans-
ceiver and the ICU.
TxChannel
Type Default Value
uint64 0
Description: Reflects the transmit channel set in the ICU.
TxAudio
Type Default Value
boolean False
Description: Local audio connection to the Transceiver transmit
audio stream.
TxPower
Type Default Value
float32 0.0
Description: Indicates the transmit power in dBm.