Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 189
Internal Parameters
Domain-
Name
Type Default Value
string
Description: The DomainName is part of the ASTiNet property set
and defines a common communications environment. All transceiv-
ers within the same domain have the ability to communicate and
Transceivers in separate domains can never communicate. It is anal-
ogous to a DIS Exercise ID or an HLA Federation name. When
defined as an ASCII string the Transceiver is natively and ASTiNet
Radio. When that string matches a defined DIS domain (as the proj-
ect level) it will map the domain name to a DIS exercise ID.
As a shortcut, define a DIS Exercise ID by entering “DIS:N”, where
N = 1 through 255. For example, “DIS:1” would put the Transceiver
in DIS Exercise ID #1.
Intercom-
Bus
Type Default Value
id unassigned
Description: Assigns the Intercom Transceiver to the Intercom Bus
Service. The Intercom Bus Service allows for input audio, sidetone
audio, and output audio to be passed around among components that
are connected to the bus.
Intercom-
Name
Type Default Value
string
Description: Set an identification name for the Intercom Trans-
ceiver.
Mode
Type Default Value
TunerMode none
Description: Displays whether the Intercom Transceiver is in VoIP
or Intercom mode. Radio modes not supported.
Internal Parameters
NetName
Type Default Value
string
Description: Indicates the set Net name.
PowerBus
Type Default Value
id unassigned
Description: Connects to the Power Service and is used in conjunc-
tion with Power Service to receive power instead of using a control.
Power-
State
Type Default Value
boolean true
Description: Displays the power state of the Intercom Transceiver.