Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
188 Copyright © 2014 Advanced Simulation Technology inc.
15.4. Intercom Transceiver
Summary: The Intercom Transceiver is a simple version of the Transceiver
component and is used with the ICU component to create a network intercom.
Description: The Intercom Transceiver connects to an ICU to create a network
intercom that broadcasts audio over the DIS network. Unlike the Transceiver, the
Intercom Transceiver operates as an Intercom only. It does not have the full radio
features.
Control Inputs
Domain-
NameIn
Type Default Value
string n/a
Description: Allows a host platform to configure the Domain name
string remotely. This input is typically used in conjunction with the
Control > NumtoString component. Refer to the DomainName
string definition for syntax.
PowerIn
Type Default Value
boolean True
Description: Enable or disable power for the Intercom Transceiver.
If not connected in the “From” field, default value is true.
ProtocolI-
DIn
Type Default Value
string n/a
Description: Allows a host platform to configure the ProtocolID
string remotely. This input is typically used in conjunction with the
Control > NumtoString component. Refer to the ProtocolID defini-
tion for syntax.
Control Outputs
Local
Audio
Type Default Value
boolean false
Description: Connects audio for transmit or receive. Also connects
the Tune tone which plays first before the remaining audio.
RxActive
Type Default Value
boolean false
Description: Indicates whether the Intercom Transceiver is receiv-
ing.
TxActive
Type Default Value
boolean false
Description: Indicates whether the IntercomTransceiver is transmit-
ting. When True the IntercomTransceiver is transmitting.
Internal Parameters
Audio
Type Default Value
uint32 0
Description: Displays the encoding rate, encoding type and the
packet samples.