Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
184 Copyright © 2014 Advanced Simulation Technology inc.
Control Inputs
Crypto
Key
Type Default Value
uint16 0
Description: If two radios are using encryption then they must have
matching crypto keys for the crypto modes. This field must match in
order for proper radio tuning.
Fill
Type Default Value
fill n/a
Description: Insert the fill created in the CommPlan by double-
clicking under the ‘Value’ column.
FreqHop
NetID
Type Default Value
uint16 0
Description: Identifies the frequency hopping network.
FreqHop
SyncTOD
Type Default Value
uint32 0
Description: Identifies the Time of Day used in frequency hopping.
FreqHop
Transec
Key
Type Default Value
uint16 0
Description: Identifies the transmission security key used in gener-
ating hopping patterns.
FreqHop
HopSet-
WOD
Type Default Value
uint16 0
Description: Identifies the set of frequencies used in hopping pat-
tern.
Control Inputs
FreqHop
LockOutId
Type Default Value
uint16 0
Description: Identifies the set of frequencies that are excluded from
hopping pattern.
FreqHop
System
Type Default Value
uint16 0
Description: Sets the system type to enable frequency hopping such
as HaveQuick or SINCGARS. When 0 frequency hopping is
ignored.
Frequency
Type Default Value
uint64 0
Description: The current radio tune frequency in Hz.
Net
Type Default Value
uint32 1
Description: Net defines the core radio features including fre-
quency, Tx frequency, waveform, crypto, and frequency hop-
ping.The Net parameters are set in the Comm Plan.
Transceiv-
erID
Type Default Value
id unassigned
Description: TransceiverID tells the RCU what Transceiver compo-
nent it should control.