Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
178 Copyright © 2014 Advanced Simulation Technology inc.
14.3.2. CellOut
Summary: The Cell Out component transmits bytes of data generated by specific
components.
Description: Cell Out provides a way to send control values from the model to a
destination host computer via the system, using an ethernet interface. The Cell Out
component is a composite collection of specific data bytes from model controls,
packed into an outgoing ethernet packet.
Control Output
CellData
Type Default Value
uint8 0
Description: The CellData field can only be a collection of 40
unsigned bytes, each of which can be used as a control to connect to
other components within the model.
Internal Parameters
CellBusID
Type Default Value
id n/a
Description: Assigns to Cell Bus Service linking components
together.
CellTrans-
mitCount
Type Default Value
uint32 0
Description: The count of the number of cells transmitted from the
cell daemon.