Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 173
K. Test Value – Displays the realtime value of the Host Input field, based on
parameters set by the user (offset byte, data type, etc.). This value can be from:
the host packet, initial value or the test mode value.
1. The Host Input component is connected to two different Audio Waves.
2. The first field in the UDP packet is sent to the frequency variable of the
Audio Wave with the value of 100.00 as float32 and the second field in the
UDP packet is sent to the gain variable in a different Audio Wave with the
value 3.0 as float32. Currently, the Init. Value is set in these components
because there are no UDP packets from the outside world.
3. The Audio Wave data viewers show the selected row of the variable that is
getting its value from the Host Input component.
L. Used By – The Used By field defines the connection to a control sink point
(Variable) in another component. Note that the value of the Host Input can be
modified (inverted, scaled, and offset) at the link sink point.
M. Other – Used to edit the test parameters specifically the ramp settings
including mode, frequency, minimum, and maximum.
N. Description – Comments field.
Control Outputs
N/A
Type Default Value
Control Data n/a
Description: The Host Input output value is based on parameters set
by the user (offset byte, data type, etc.).
Internal Parameters
BigEndian
Type Default Value
boolean false
Description: Changes the byte order. The endianness defines the
byte order for the data in a packet.
Default_on
_init
Type Default Value
float
integer
boolean
0.000
0
0
Description: Realtime value of data field, from host packet, initial
value or test mode
Modifier: None
Range: Min - Max values of each type
Default_on
_Src_fail
Type Default Value
float
integer
boolean
0.000
0
0
Description: Initial value of data field, applied if source data is not
present (host fail), field-wide
Modifier: None
Range: Min - Max values of each type
Enable_Te
st_Mode
Type Default Value
boolean true
Description: True toggles the test mode on for host control testing.