Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 163
13.1. Detonation
Summary: The Detonation component looks at Detonation PDUs on the DIS
network and outputs their values for use within the model.
Description: This component is used primarily for triggering sounds and events
based on incoming Detonation PDUs from the DIS Network. The component
presents relevant fields needed to determine the sound, while other parts of the
PDU are ignored. All values are held until another Detonation PDU is detected. The
Serial variable will increment with every Detonation PDU detected on the network.
The PDU Type must equal 3 for the Detonation component to present the values.
All nomenclature is based on the DIS standard for Detonation PDUs.
13.2. Fire
Summary: The Fire component looks at Fire PDUs on the DIS Network and
outputs their values for use within the model.
Description: This component is used primarily for triggering sounds and events
based on incoming Fire PDUs from the DIS Network. The component presents
relevant fields needed to determine the sound, while other parts of the PDU are
ignored. All values are held until another Fire PDU is detected. The Serial variable
will increment with every Fire PDU detected on the network. The PDU Type must
be equal to 2 for the Fire component to present the values.
All nomenclature is based on the DIS standard for Fire PDUs.
Control Outputs
Serial
Type Default Value
uint32 0
Description: The Serial value will increment with each incoming
Detonation PDU, such as type 3 DIS PDUs. All other values in the
component will update with the Serial value based on the incoming
packet.
Location
X, Y, Z
Type Default Value
float32 0.0
Description: The geocentric location, in meters.
VelocityX,
Y, Z
Type Default Value
float32 0.0
Description: The geocentric velocity, in meters per second.
Control Outputs
Serial
Type Default Value
uint32 0
Description: The Serial value will increment with each incoming
Detonation PDU, such as type 2 DIS PDUs. All other values in the
component will update with the Serial value, based on the incoming
packet.
Location
X, Y, Z
Type Default Value
float32 0.0
Description: The geocentric location, in meters.
VelocityX,
Y, Z
Type Default Value
float32 0.0
Description: The geocentric velocity, in meters per second.