Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 155
Control Outputs
PTT
Type Default Value
boolean False
Description: When true, audio is actively transmitting.
InCon-
trolA
Type Default Value
uint8 0
Description: Selects the radios (1-8) in the Comm Panel to transmit
on. (Bitmask)
InCon-
trolB
Type Default Value
uint8 0
Description: Selects the radios (9-16) in the Comm Panel to trans-
mit on. (Bitmask)
NetOut
Type Default Value
int32 0
Description: Net selection from the remote client.
(One output per radio, radios 1-16)
OutCon-
trolA
Type Default Value
uint8 0
Description: Selects the radios (1-8) to receive from. (Bitmask)
OutCon-
trolB
Type Default Value
uint8 0
Description: Selects the radios (9-16) to receive from. (Bitmask)
Control Outputs
Volume
Type Default Value
float32 0
Description: Sets the radio receive gain.
(One output per radio, radios 1-16)
Internal Parameters
Default-
Net
Type Default Value
uint8 0
Description: The initial net that the radio will be tuned to after an
install.
(One parameter per radio, radios 1-16)
Default
RxState
Type Default Value
uint8 0
Description: The initial receive/transmit settings after an install.
(One parameter per radio, radios 1-16)
Device
Name
Type Default Value
string n/a
Description: The name given to the operator instance in the model.
NetLock
Type Default Value
boolean False
Description: Controls whether the remote client can change the
default net selection.
(One parameter per radio, radios 1-16)