Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
152 Copyright © 2014 Advanced Simulation Technology inc.
11.6. AmpOut
Summary: The software configurable component for the amplifier hardware
devices.
Description: The AmpOut component drives up to 32 audio streams from within
the model to a specified channel of the amplifier.
Audio Input
AudioOut0
-31
Type Default Value
Description: Mixes up to 32 audio streams before it is routed out of
the amplifier channel.
Control Inputs
AudioOut-
Gain
Type Default Value
float32 1.0
Description: Provides the overall gain control for the AudioOut.
Limiter
Enable
Type Default Value
boolean True
Description: Turns the limiter stage on or off in the component. If
True, the peak output levels of the component will not go above the
LimThreshold.
Limiter
Release
Type Default Value
float32 1.0
Description: The rate, in dB/sec, that determines how quickly the
limiter responds to a drop in signal levels. Higher releases cause a
faster increase in gain to ensure quiet signals are not reduced in vol-
ume.
Control Inputs
Limiter
Threshold
Type Default Value
float32 1.0
Description: The maximum peak level in dB allowed in the output
signal. -12 corresponds to 0.25 linear, or 1/4 of a “full scale” signal.
Volume
Type Default Value
float32 1.0
Description: Sets the main volume of the amplifier.
Internal Parameters
Channel
Type Default Value
acenet_channel n/a
Description: Selects the amplifier channel.
Identifier
Type Default Value
device_id n/a
Description: Select the name of the amplifier.