Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
148 Copyright © 2014 Advanced Simulation Technology inc.
11.4. ACU2channel
Summary: The software configurable component for the ACU2 hardware device.
Description: The ACU2channel connects the software model audio to a channel of
the physical ACU2 device. The control outputs provide the PTT channel selection
for channels 0-3. Adjust audio strength with the AudioOut and AudioIn gains. The
volume controls the overall channel’s volume. The ACU2 has 4 stereo audio inputs/
outputs that provide support for multiple mono/stereo operators and audio
equipment.
Audio Input
AudioOut0
-31
Type Default Value
audio n/a
Description: Mono audio output of the ACU2channel. Mixes up to
32 audio streams.
AudioOut-
sLeft
Type Default Value
audio n/a
Description: Audio that is routed out the left stereo channel. This
audio is also mixed with the AudioOut audio streams. Mixes up to
32 audio streams.
AudioOut-
sRight
Type Default Value
audio n/a
Description: Audio that is routed out the right stereo channel. This
audio is also mixed with the AudioOut audio streams. Mixes up to
32 audio streams
Control Input
AudioOut-
Gain
Type Default Value
float32 1.0
Description: The gain control for the AudioOut.
AudioOut-
GainL
Type Default Value
float32 1.0
Description: The gain control for the AudioOutsLeft audio output.
AudioOut-
GainR
Type Default Value
float32 1.0
Description: The gain control for the AudioOutsRight audio output.
AudioIn-
Gain
Type Default Value
float32 1.0
Description: The gain control for the AudioIn.
DigitalOut
Type Default Value
float32 1.0
Description: The ACU2 digital output allows the software to drive a
digital output for the ACU2channel. There is one digital output per
channel.
Volume
Type Default Value
float32 1.0
Description: Sets the main volume of the ACU2channel outputs.