Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 5
Audio Inputs
Modula-
tionOffset
Type Default Value
float32 1.0
Description: Value added to modulation signal prior to multiplica-
tion by carrier signal. If no external variable is connected to Modu-
lationOffset, the offset scale factor is used; otherwise, the offset is
the scale factor times the output result of the external variable.
If a pulse stream is used then this offset should be set to 0.0 for an
on/off modulation of the carrier.
Modifier: multiply
Modifier_default: 0.0
Range: 0.0-1.0
Modulate
Type Default Value
boolean false
Description: Modulate control, when On carrier is modulated; oth-
erwise, the carrier passes through with no modulation. If no external
variable is connected to Modulate, the exclusive-or modifier is used
as the local modulate flag; otherwise, the modulate value is the
exclusive-or of the external variable and the modifier.
Modifier: XOR
Modifier_default: True
Audio Outputs
OutSignal
Type Default Value
audio n/a
Description: OutSignal is the output signal from the amplitude
modulator component, which may be connected to another compo-
nent or directed to an output highway.
Internal Parameters
FilterFre-
quency
Type Default Value
float32 2400.0
Description: Roll-off frequency for modulation signal lag filter (in
Hertz).
Modifier: Multiply
Modifier_default: 2400.0