Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 135
9.5. AudioIO > HighwayOut
Summary: Extracts the specified Highway’s audio from the Highway 3D Service.
The AudioOut typically is linked directly to a hardware (ACE-RIU, ACU, etc.)
component’s audio out.
Description: To create new highways as needed double-click on the Source
Highway value and then add new busses in the service window. For example, add a
highway for each speaker or headset. Name the highways based on the
corresponding hardware that it is linked to, e.g. “Pilot Headset”.
To put audio onto the highways, use the Audio> AudioFeed component and a
Feeders>Balancer component. The Balancer takes audio from the AudioFeed and
puts it onto one or more highways.
Control Input
Gain
Type Default Value
float32 n/a
Description: A gain applied to the Audio output.
Audio Output
AudioOut
Type Default Value
audio n/a
Description: The highway’s audio.
Internal Parameter
Source
Highway
Type Default Value
ID unassigned
Description: Specifies which highway to extract audio from.